|Home||» Products||» Oilon Spares||» Gas Burners|
Our valuable clients can purchase from us optimum quality Gas Burners that are widely used in power plants, forging, metallurgy etc. These burners are manufactured utilizing fine grade components that are procured from our reliable vendors. Available in various technical specifications as per the specific needs of our clients, we assure that these burners are meticulously tested by our quality analysts on defined benchmarks for ensuring a defect-free product delivery. The offered Gas Burners can be bought from us at economical rates.
High operational fluency
Long working life
Different fuels can be used depending on the burner model:
Light fuel oil, viscosity 4 to 12 mm2/s, +20oC
Heavy fuel oil, viscosity max. 250 mm2/s, +50oC
Heavy fuel oil, viscosity max. 450 mm2/s, +50oC heating cartridge for pump, nozzle and solenoid valves
Heavy fuel oil, viscosity max. 650 mm2/s, +50oC heating cartridges as above + trace heating for the oil train
natural gas, gases of 2nd family, groups H and E (equipment categories I and I2E)
GKP and GRP dual fuel burners
Fuel properties as above, natural gas/light fuel oil
Fuel properties as above, natural gas/heavy fuel oil
Burners using other fuels are available on request.
The gas-related components of the burner are mounted according to the EN 676 standard: two shut-off valves, pressure switches (min./max.), and an automatic valve proving system. Other train equipment is available on request.
Mounted on the burner, three-stage burners with four solenoid valves (one main valve and one valve for each nozzle). Modulating burners have three solenoid valves. The oil regulator for the modulating burner is located on the oil line returning from the nozzle. The oil filter is located on the suction side of the pump. The two oil hoses enable the burner to be hinged.
All models are equipped with automatic flame monitoring. In KP and RP models, flame monitoring is taken care of via photocell; in GP, GKP, and GRP models, it is performed via UV cell.
The control automatics (control unit) are integrated with the burner. The control unit handles all burner operation phases automatically. In the event of a burner failure, the automatics stop the burner automatically. The modulating burners also incorporate a pre-mounted capacity controller. Subject to additional charge, the burners can be delivered with electronic ratio control.
The sound level of the burners is low, but, if desired, they can be equipped with a separate silencer to make them even quieter.
Optimizing combustion head pressure loss
At an additional charge, the modulating burners can be equipped with a system that optimizes the combustion head pressure loss. The system reduces the amount of excess air and also improves combustion figures for partial burner loads.